Precision Datum Construction for X-Ray Detailed instructions for setting up and calibrating an OPTEK X-Ray Measurement System Pertains to X-ray models.	203KB
QC5000 Grid Calibration Detailed instructions for preparing and calibrating a system using VED. Pertains to Video models.	94KB
Import Preparation How to cut down your DXF information from CAD files to optimize autoprogramming in QC5000 Pertains to X-Ray and Video models.	13KB
Auto Programming from Features in QC5000 Detailed instructions on how to import a DXF into QC5000, set tolerances, and then measure each feature using autoprogramming. Pertains to X-Ray and Video models.	315KB
QC5000 Exporting Data How to export data from QC5000 in a variety of formats including CAD, SPC, Excel . . . Pertains to X-Ray and Video models.	1,717KB
QC5000 Programming Commands Introduction to the programming feature of QC5000. This PDF will familiarize you with the programming buttons and their uses. Pertains to X-Ray and Video models.	40KB
QC5000 Using Variables in Arrays In depth instructions on how to palletize a program by creating a grid array. Pertains to X-Ray and Video models.	237KB
Preparing for DXF imports Information on what is required by an OPTEK to measure features.	11KB
Upgrading Memory in QC5000 This PDF contains vital information on upgrading memory for the QC5000 platform. Pertains to X-Ray and Video models with QC5000	12KB
Lighting for VED Very helpful guide to lighting options and their applications for OPTEK measuring machines. Pertains to Video models.	32KB
Lighting for V Groove Measurement Instructions for taking measurements on V-Groove or scored features using auto focus and the Z-Trac lighting option. Pertains to Video models.	11KB
Measurement of Slots And Squares How to measure slot and square dimensions for different applications with different techniques. Pertains to X-Ray and Video models.	70KB
QC5000 Grid Calibration X-Ray Detailed instructions on how to calibrate an OPTEK X-Ray system. Pertains to X-Ray models.	226KB
QC5000 Coreco Software Drivers for Coreco Bandit II imaging card. These drivers are for use ONLY with Bandit II cards.	(.ZIP) 9.98MB
Matrox Mill & Software Drivers Contains the drivers for the Matrox Corona board.	(.ZIP) 62.7MB

For QC4000 and QC5000 manuals click here. You will be redirected to Metronics to receive the latest available manuals.

DPL-24 Instructions DPL-24 Operator Instructions	39KB
DPL-24 Manual Detailed owner's manual covering all aspects of the DPL-24 including maintenance, operation and lamination advantages over traditional roller-type laminators.	820KB
DPL 24 Overview Overview of the features and operating principle of the DPL-24.	274KB

OPTEK Status Monitor Drivers & Software Package Download OPTEK Status Monitor software and the USB I/O drivers. Works ONLY with VSA systems equipped with temperature sensors and updated I/O boards.	(.ZIP) 66.5MB
OPTEK Status Monitor Install and Troubleshooting Instructions for installing and troubleshooting OPTEK Status Monitor.	3.8MB

Lighthouse Controller Manual Owner's manual for OPTEK Lighthouse LED controllers. Includes instructions for initial setup and adjusting light outputs.	76KB
CCLight Setup Software This application controls lighting modules without having to run QC5000.	(.EXE) 3.6M
CCLight Installation Instructions Details on how to setup the CCLight software for use with QuadraCheck.	91KB

OPTEK Light Control Bitmaps for Video	(.ZIP) 2KB
OPTEK Light Control Bitmaps for X-ray	(.ZIP) 2KB
OPTEK Light Control Bitmaps for LightHouse Controller	(.ZIP) 1KB
The above bitmaps can be downloaded and then imported into QuadraCheck to reflect lighting options installed for your particular system. Download the ZIP package, extract the files, and then place them in your ..\QC4000\ or ..\QC5000\ directory