For machine vision and general illumination in microscopy applications, OPTEK now offers a new series of Constant Current, Microprocessor Based LED Controllers as well as a variety of LED illuminators for microscope and machine vision applications. These modern lighting solutions provide exceptional performance without the heat, bulky fiber-optic bundles, or frequent bulb replacement of tungsten-halogen lamps. OEM pricing is available for quantity orders. LED Lighting Characteristics to Note: The life expectancy of LED's (Light Emitting Diodes) is as great as 50 times that of the tungsten-halogen lamps normally associated with fiber-optic illumination. LED's also dissipate minimal heat. Therefore no noisy, vibrating fans are required and the illuminated sample will not distort from heat. Quadrant lighting allows selective illumination from North, South, East, and West directions. Each quadrant has a large number of LED's for uniform illumination of the sample. As compared to typical angled illuminators that utilize several fiber-optic bundles, in the Quadrangle Illuminator each individual LED contributes a small percentage of the overall light. Therefore, the specular component is minimized. This yields a superior, 'flat-field' image. Download LED catalogue in PDF.

7100-2679 'LIGHTHOUSE-6' - SIX-CHANNEL LED LIGHTING CONTROLLER

This unit allows for manual or computer control of 4 quadrants of LED Top lighting, as well as HAI-Lighting, and Profile Illuminators. LIGHTHOUSE-6 comes with Windows applet software to allow "On-Top" display and recall of precise digital settings for all channels. Dimensions: 6.25"w X 7.75" d X 1.75" h Weight: 19 oz. (.53 kg) Electrical Requirements: 24VDC - 36 VDC, 2.1mm X 5.5mm DC jack, center positive Output: 0-500 mA, 15 pin D-Sub male Serial: Baud=19200, Data, Bits=8,Stop Bits=1, Parity=0, 9 Pin D-Sub, male Price: USD $1,250.00

7100-2753 'LIGHTHOUSE-1' - SINGLE CHANNEL LED LIGHTING CONTROLLER

This unit allows for manual or computer control of a single LED Lighting Module, with higher current capability for LED modules that require more power. LIGHTHOUSE-1 comes with the same software as the LIGHTHOUSE-6. Dimensions: 3.25"w X 5.625" d X 1.5" h Weight: 8 oz. (.22 kg) Electrical Requirements: 24VDC - 36 VDC, 2.1mm X 5.5mm DC jack, center positive Output: 0-1 Amp, 2.5mm mono phone jack Serial: Baud=19200, Data, Bits=8,Stop Bits=1, Parity=0, 9 Pin D-Sub, male Price: USD $500.00

7100-2737 RING LIGHT (LENS MOUNTED)

This 40 Lamp module mounts directly to many of today's machine vision fixed and Zoom style lenses. Adapters for several lens configurations are available. When ordering, please ask about your lens. The RING LIGHT can accommodate the (Lens Mounted) Quadrangle light described below. Dimensions: 1.25"D (mount) X 2.25" OD X 1.0" h Electrical Requirements: 160 mA, 2 pin micro CPC, 5mm White LED, 5500°K Price: USD $600.00

7100-2743 QUADRANGLE TOP ILLUMINATOR (LENS MOUNTED)

This White Light, 96 lamp, 4 Quadrant, module mounts to the 7100-2737 unit described above and can be height-adjusted to optimize the video image with essentially dark field illumination. The LEDs are mounted to illuminate at a shallow angle to the surface, minimizing glare from reflective horizontal surfaces. Dimensions: 3.625" ID (to LED's) X 5.0" OD X 1.0" h Electrical Requirements: 1 Amp (240 mA/quadrant), 8 pin micro CPC, 5mm White LED, 5500°K Price: USD $900.00

9108-0092 QUADRANGLE TOP ILLUMINATOR (LARGE)

This 192 lamp, 4 Quadrant module can be used with microscopes, video measurement and inspection devices as well as off-the-shelf powered and manual Zoom Lenses. The bottom ring shines inward at 7.5 degrees from horizontal, converging at a working distance of 0.1". The top ring shines downward at 70 degrees, converging at a 2.2" working distance. This module requires independent mounting, as it is too large to mount directly to the lens. Dimensions: 2" ID X 5.0" OD X 1.5" h Electrical Requirements:640 mA (160 mA/quadrant), 8 pin micro CPC, 5mm White LED, 5500°K Price: USD $1800.00

7100-2731 HAI-Light 16 Lamp HAI (HIGH ANGLE OF INCIDENCE)

This 16 Lamp module mounts directly to many of today's machine vision fixed and Zoom style lenses. Adapters for several lens configurations are available. When ordering, please ask about your lens. The RING LIGHT can accommodate the (Lens Mounted) Quadrangle light described above. Dimensions: 1.28"ID X 1.70" OD X 1.0" h Electrical Requirements: 80 mA, 2 pin micro CPC, 5mm White LED, 5500°K Price: USD $500.00

9108-0090 - WHITE PROFILE ILLUMINATOR 9108-0101 - RED PROFILE ILLUMINATOR 9108-0102 - GREEN PROFILE ILLUMINATOR
	These 64 lamp modules provide a high-intensity, homogenous backlight for the profile illumination of specimens. Dimensions:3.188 w X 2.438" d X .75" h Electrical Requirements:320 mA, 21 VDC, White LED, 5500ºK Price: USD $800.00